Gratuity calculatorA free tool on creditcardcustomercare.com

Gratuity calculator for India (2026)

Uses the Payment of Gratuity Act formula — last-drawn monthly wages × 15 × years ÷ 26 — and shows how the Code on Social Security note on wages and fixed-term staff changes the picture. Every figure is an estimate.

Estimate statutory gratuityवैधानिक ग्रेच्युटी का अनुमान

How India calculates gratuity — the 15/26 formula and the 2026 labour-code note

People searching for a “gratuity calculator 2026” or “gratuity calculator as per new rule” are usually trying to answer one question: if I leave this job, what does the statute roughly promise? This page shows the working in the open. It does not file a claim and it does not replace your company’s payroll sheet.

The Payment of Gratuity Act, 1972

Section 4 of the Act says gratuity is payable after not less than five years of continuous service on superannuation, retirement or resignation, and also on death or disablement due to accident or disease. The five-year condition is not required when the job ends by death or disablement. The official text is on the Ministry of Labour and Employment site, including the compiled Act PDF hosted at labour.gov.in.

Section 4(2) sets the rate: for every completed year of service, or part thereof in excess of six months, the employer pays gratuity at fifteen days’ wages based on wages last drawn. The explanation under that sub-section is the line every calculator should show: for a monthly-rated employee, fifteen days’ wages are calculated by dividing the monthly rate of wages last drawn by twenty-six and multiplying the quotient by fifteen. In algebra that is:

Gratuity = (last-drawn monthly wages × 15 × qualifying years) ÷ 26

Worked example (the numbers you can also run in the form above): last-drawn wages ₹26,000 a month, ten completed years, no extra months. Fifteen days’ wages = 26,000 ÷ 26 × 15 = ₹15,000. For ten years the estimate is ₹1,50,000. Another example: ₹30,000 a month and seven years plus seven months. The extra seven months are more than six, so the tool counts eight years. 30,000 × 15 ÷ 26 × 8 = ₹1,38,461.54 (rounded to the nearest paisa in the display).

The ₹20 lakh ceiling

The Act lets the Central Government notify a maximum. By notification S.O. 1420(E) dated 29 March 2018 that maximum became twenty lakh rupees (the earlier figure of ten lakh rupees was raised). A copy of the news note is archived by the Tamil Nadu labour department at labour.tn.gov.in. Official FAQ compilations in 2026 still describe the notified maximum as ₹20 lakh. If the raw formula goes higher, this tool shows both the uncapped figure and the capped statutory estimate. A better contractual term can exceed the cap; the statute does not stop an employer from paying more.

What changed with the Code on Social Security, 2020

A Lok Sabha reply dated 20 July 2026 (Unstarred Question 152) states that the four labour codes, including the Code on Social Security, 2020, were implemented with effect from 21 November 2025, and that Central Rules were notified on 8 May 2026. The Ministry’s “FAQs on Labour Codes” (PDF hosted on labour.gov.in) say gratuity under the Code applies from that 21 November 2025 date, not retrospectively. The same FAQ set repeats the 15-days-per-year idea, keeps a notified ceiling described as ₹20 lakh, and explains a single definition of wages with a 50% allowance test: if allowances other than excluded items such as gratuity and retrenchment compensation exceed 50% of total remuneration, the excess is added back to wages.

Illustration of that add-back, following the FAQ’s structure with clear numbers: basic ₹20,000, dearness allowance ₹16,000, other allowances ₹40,000. Total remuneration = ₹76,000. Half of that total is ₹38,000. Other allowances are ₹2,000 above that half, so ₹2,000 is added back. Wages for the statutory estimate become ₹20,000 + ₹16,000 + ₹2,000 = ₹38,000. Tick the 50% box in the form to apply this. If you leave the box clear, wages are treated as basic plus dearness allowance only — the older, simpler reading many private-employee calculators still use.

The Code also treats fixed-term employees more clearly: government explainers and a PIB factsheet on section 53 say a fixed-term employee becomes eligible after one year, on a proportionate basis. Choose “Fixed-term contract” in the form to use a one-year threshold instead of five. Death or disablement still skips the waiting period.

What this calculator does not decide

It does not compute piece-rated averages, seasonal establishments (the Act speaks of seven days’ wages per season), forfeiture for certain dismissals, or the separate death-cum-retirement gratuity rules that apply to many central government employees. “Wages” in a real dispute can depend on how your pay slip is structured and on how the current Code, the saved older notifications and your state rules fit together. During the transition, official replies have said older rules continue where they are not inconsistent with the Codes. Treat every result here as an estimate you should check against the official text and your own documents.

Frequently asked questionsअक्सर पूछे जाने वाले प्रश्न

What is the standard gratuity formula in India?

For a monthly-rated employee the Payment of Gratuity Act, 1972, section 4(2) explanation says: fifteen days’ wages = (monthly wages last drawn ÷ 26) × 15. Multiply that by the number of qualifying years. The same 15-days-per-year idea appears in official labour-code FAQs.

What counts as a qualifying year?

A completed year, plus any leftover period of more than six months, counts as one more year (section 4(2)). A leftover period of six months or less is not rounded up.

Do I always need five years of service?

Under the 1972 Act, five years of continuous service is the usual rule for resignation, retirement or superannuation. The five-year wait does not apply when employment ends by death or disablement. The Code on Social Security, 2020, which the government has said is in force from 21 November 2025, also treats fixed-term employment as eligible after one year, on a proportionate basis (see official FAQs and PIB notes on section 53).

What is the maximum gratuity?

The Central Government notified a ceiling of ₹20 lakh by S.O. 1420(E) dated 29 March 2018. Official labour-code FAQs published around 2026 still describe the notified maximum as ₹20 lakh. An employer may pay more under a better contract (old section 4(5) idea). This tool caps the statutory estimate at ₹20 lakh and shows the uncapped figure separately.

What is the “new rule” or 50% wage rule?

Labour-code FAQs explain a single definition of wages: basic pay, dearness allowance and retaining allowance, with a 50% test. If other allowances (leaving out items such as gratuity and retrenchment compensation) go above 50% of total remuneration, the extra amount is added back and treated as wages. This calculator can apply that add-back when you enter allowances. It is an estimate, not a private ruling.

Does this replace a government or company calculation?

No. It is an educational estimate for private-sector style monthly-rated employees. Central government death-cum-retirement gratuity, teachers, seasonal workers and piece-rated workers have special rules. Confirm with your employer, works accounts or a qualified adviser, and read the official text on labour.gov.in.

This is an educational estimate, not legal or payroll advice and not a government calculator. Read the Payment of Gratuity Act, 1972, notification S.O. 1420(E) of 29 March 2018, the Code on Social Security, 2020, and the Ministry FAQs on labour.gov.in before you rely on a number.